Features:
Anodic process, pants up & down, 360° side to side
Patented heat dissipation camera housing
High sensitivity, true color, high resolution
| Specification |
| Picture Elements HxV |
NTSC/EIA: 510*492; PAL/CCIR: 500*582 (medium) |
| Picture Elements HxV |
NTSC/EIA: 768*494; PAL/CCIR: 753*582 (High) |
| H.Sync Frequency |
NTSC: 15,734 KHz, PAL: 15,625 KHz |
| V.Sync.Frequency |
NTSC: 59.94 Hz, PAL: 50 Hz |
| Synchronization |
Internal |
| White Balance |
Auto white balance |
| Electronic Shutter |
Auto, Rang: 1/50 (1/60) ~ 1/100,000 sec. |
| Gain Control |
Auto |
| Gamma |
0.45 |
| S/N Ratio |
More than 48 dB (AGC off) |
| Video Output |
1 Vp-p, 75 Ohms |
| Dimension (diameter x L) |
94 x 78.14 mm |
| Power Supply |
DC 12V (+/- 10%) |
| Led |
O 5 x 28 pcs |
| Storage Temperature |
-20°C ~ 70°C |
| Operating Temperature |
-10°C ~ 60°C |
| Weight |
440g |
| Model |
Chips |
Lens (m/m) |
Night Vision |
Min.Illumination |
Resolution |
Power
Consumption |
| 1028SD |
1/3" Sony |
3.6/6/8/12 |
20 M |
0.1 Lux
(0 Lux Led on) |
480 TV lines |
90mA(led off)
320mA(led on) |
| 1028SHD |
1/3" Sony HQ1 |
3.6/6/8/12 |
17 M |
0.3 Lux
(0 Lux Led on) |
520 TV lines |
130mA(led off)
400mA(led on) |
| 1028S2D |
1/3" Sony |
3.6/6/8/12 |
20 M |
0.1 Lux
(0 Lux Led on) |
420 TV lines |
110mA(led off)
380mA(led on) |
Cautions:
Installation should conform to all local codes.
In order to protect the camera, avoid placing or using it under direct sunlight, rain or dust.
Don't touch the CCD sensor directly with your fingers. If necessary, use soft cloth moistened with alcohol to wipe off the dust.
DC model: use a +12V regulated power source.
Don't drop your camera or give it a strong shock or vibration.
Connection:
Before connection, make sure that power of all units are off and cords are unplugged.
Connect a video terminal of the camera and the video input terminal of a monitor TV with a 75Ω coaxial cable.
Connect the power terminal of the camera to a power supply. |
